Additional information
The electric barrier for gutter consists of a stainless steel carrier belt with welded Y-shaped carrier rods with insulators at the end and 4 fixing strips. These strips are bent around the edge of the gutter with a pipe wrench and may be riveted or screwed to increase strength. Stainless steel rods with a diameter of 2 mm are inserted into the insulators. The rods along the entire length of the barrier are electrically conductively connected to each other by stainless steel springs. A pulse voltage of approximately 5,000 volts at 16 mA is applied to these stainless steel rods (electrodes). As a result, pigeons and other birds are permanently prevented from landing and nesting in the gutters without being harmed. The electric barrier will repel the birds and is the right bird control system – effective, unobtrusive and harmless to the birds.
Before assembly, the surface must be cleaned and degreased.